Case Studies
Plastic Tube Punching Machine
EBS Automation was commissioned to design and manufacture a machine that would punch air vent holes in plastic tubes used to protect young plants as they grow. The machine had to produce various lengths of tube with different vent hole patterns. It was designed to...
Spin Riveting Machine
EBS Automation was commissioned by an international cast components manufacturer, to design and manufacture a simple, robust method for joining three parts together whilst maintaining a sliding tolerance. This was achieved by a design incorporating a Spin Riveting...
Refurbishment and Re-tooling an old machine
EBS Automation was commissioned to Refurbish and Re-tool a machine that had come to the end of its useful life and had been de-commissioned. Our client had a requirement to produce a new type of product that was similar to the one previously produced on this machine...
Sealing Ring Vision Inspection Machine
EBS Automation was commissioned to design and manufacture a machine to Inspect sealing rings to detect surface defects, flatness and colour coding to improve efficiency and quality control. The machine was designed to replace a visual inspection operation of sealing...
Automated assembly, leak test & Oil fill machine for an Automotive gearbox
EBS Automation was commissioned to design and build a fully automated machine to assemble, leak test and oil fill an automotive gearbox. The machine uses a pallet track system to transport the product through the automation process lifting the pallet at each...
Glue and Assembly Machine
EBS Automation were commissioned by a major international filter manufacturer who supply filters to the Automotiveworld. They had a requirement for a machine to glue and assemble end caps to either end of a paper filter and be able to produce a range of different...
Chain Splitting Machine
EBS Automation was commissioned by a major international fork lift truck manufacturer to provide a Chain Splitting and Anchor Assembly Machine, complete with changeover tooling for 7-off chain types. The machine comprised of a fabricated box section base a substantial...
Core Build Machine
EBS Automation was commissioned by a Japanese multinational heat exchanger manufacturer to design and manufacture a flexible low to medium volume machine. This was used for building Heat Exchanger Cores in the following size ranges: Between tube plates - 220mm to...
Bearing Assembly Machine
EBS Automation was commissioned by an international bearing manufacturer to design and manufacture an assembly machine for a new bearing. The new bearing comprised of: a hub with 2-Bearing Races of 22 rollers each, Intermediate Ring & Cir-clip. The machine...
Synchro Ring Vision Inspection
EBS Automation was commissioned to design and build an automated inspection machine to inspect assembled and packed synchro rings to ensure correct packaging. The machine uses a cognex vision system to inspect two packages with three products in each. The inspection...
Automated Plastic Welding and Assembly Machine
EBS Automation was commissioned to design and build an automated welding and assembly machine to plastic weld and assemble filter log units. The machine welds end caps to filter log units using Infrared heater technology. It then welds and assembles log to log units...
Pick and Place Production Cell
EBS Automation was commissioned to design and build a pick and place production cell which would pick a large sachet containing pharmaceutical powder and place it in to a flow wrapper pocketed conveyor and then pick and place a small sachet containing a second part of...